Hydz 9045 Brass Pin Type Smd Buzzer
product detail
Electrical Characteristics
|
Part No. |
HYG9045A-03 |
HYG9045A-05 |
|
Rated Voltage (Vp-p) |
3 |
5 |
|
Operating Voltage (Vp-p) |
2.5~4.5 |
4~7 |
|
Coil Resistance (Ω) |
16±4 |
30±6 |
|
Resonant Frequency (Hz) |
2731 |
|
|
Current Consumption (mA/max.) |
100 at Rated Voltage |
|
|
Sound Pressure Level (dB/min.) |
Min 80 at 10cm at Rated Voltage |
|
|
Operating Temperature (℃) |
-20 ~ +60 |
|
|
Storage Temperature (℃) |
-30 ~ +80 |
|
|
Leaded Pin material |
Brass plated |
|
|
Housing material |
LCP(black) |
|
|
Environmental protection rule |
ROHS |
|
PS：Vp-p＝1/2duty , square wave
Dimensions and Material
Unit : mm TOL：±0.3mm
Applications
Telephone, Clocks, Medical equipment, Digital products, Toys, Official equipment, Note computers, Microwave ovens, Air conditioners, Home electronics, Automatic controlling devices.
Handling Notice
- Please don't touch the component with the bare hand, because electrode maybe corroded.
- Avoid excessive pulling lead wire because wire may break or soldering point may come off.
- The circuits utilizes transistor switching, The circuit constants for heft of the transistor are optimally chosen to maintain stable, so please follow it when you design a circuit.
- Magnetic sounders are driven by an input frequency, the given frequency characteristics can be obtained only when applying 1/2 duty square wave(Vb-p). The end-users must know the facts that the characteristics of frequency may be quite change in different shapes with the applied various waves, like sine wave, square wave (Vb-p) or the other waves.
- When other voltage are applied than recommended one, the characteristics of frequency will be also changed.
- Please keep proper distance for strong magnetic field when you storing、transiting and mounting.
Soldering And Mounting
- Please read of HYDZ specification, if soldering component is needed.
- Washing of the component is not acceptable, because it is not scaled.
- Please do not cover the hole with tape or other obstacles, as this will produce irregular operation.
Measuring Circuit and Condition
Input Signal: Rated Signal.
S.G: Signal Generator
mA: Millam meter Amp: Amplifier
Mic.: Measuring Condenser Microphone
DSP: Display Screen
Mic. + Amp. Can be replaced by a SPL meter.
Resistance and capacitor: LCR Meter or Multi-meter. Measuring Condition: 5〜35°C R.H.45〜75%
Judgement Condition: 25±2°C R.H.45〜75%