Leave Your Message

hydz classic piezo 12VDC buzzer HYT-3015

Features:

1.HYDZ Piezoelectric wire type, 3-24VDC operating, wide range

2.Convenient Screw hole installation

3.High sound pressure level and clear sound

4.Continuous tone. Make sound no less than 90dB at 30cm, Widely used in devices need alert warning

4. Steady structure and performance using full-automatically made PCB with lower defective rate

    product detail

    Electrical Characteristics

    1

    Rated Voltage (VAC)

    12V

    2

    Operating Voltage (V)

    3~24

    3

    Sound Output at 10cm (dB)

    ≥90

    4

    Current Consumption (mA)

    ≤15

    5

    Resonant Frequency (Hz)

    3300±500

    6

    Operating Temperature (℃)

    -20~+80

    7

    Housing Material

    ABS

    8

    Weight (g)

     8.0

    Dimensions and Material (unit:mm)

     695c7cf1b802a19062.jpg

    Toleran ce: ±0. 5mm Except Spec ified

    Features

    1.HYDZ Piezoelectric wire type, 3-24VDC operating, wide range
    2.Convenient Screw hole installation
    3.High sound pressure level and clear sound
    4.Continuous tone. Make sound no less than 90dB at 30cm, Widely used in devices need alert warning
    4. Steady structure and performance using full-automatically made PCB with lower defective rate

    Notice (HANDLING )

    1. The component may be damaged if mechanical stress exceeding specifications is applied.
    2. Take care to protect the operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change.
    3. Avoid excessive pulling of the lead wire because the wire may break or the soldering point come off.

    Notice (Storage and Operating Condition)

    1. Product Storage Condition
      Please store the products in a room where the temperature/humidity is stable and avoid places where there are large temperature changes. Please store the products under the following conditions:
      Temperature: -10 to + 40°C
      Humidity: 15 to 85% R.H.
    2. Expiration Date on Storage
      Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confi rm solderability and characteristics for the products regularly.
    3. Notice on Product Storage
      Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfi des and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to storage in a chemical atmosphere.