Leave Your Message

China Suppliers Factory Hydz φ14H4 Small Wired Piezo Sounder for Medical Devices and Meters

,

Product Description:

,

Introducing our compact and efficient D14*H4mm piezoelectric wire leaded type, designed for optimal performance in various applications. This small-sized component is easy to mount and operates effectively with a 1/2 square wave drive, making it a perfect choice for medical smart devices and meters.

,

As a leading manufacturer in China, we are proud to supply high-quality piezoelectric components to meet the demands of our clients. Our factory is equipped to accommodate special requests, including designated terminal connectors, ensuring that we can provide customized solutions for your specific needs.

,

Choose our reliable products and benefit from our expertise as prominent suppliers in the industry.

,

    Electrical Characteristics

    Part No: HYR-1404L
    # Parameter Specification
    1 Resonance Frequency (KHz) 4.0 square wave
    2 Max Input Voltage (Vp-p) 30
    3 Capacitance at 120Hz (nF) 12000±30% at 100Hz/1V
    4 Sound Output at 10cm (dB) Min.75 at 10cm, 5Vp-p, 4.8KHz
    5 Current Consumption (mA) ≤2 at 4.0KHz Square Wave 12Vp-p
    6 Operating Temperature (℃) -20~+70
    7 Storage Temperature (℃) -30~+80
    8 Weight (g) 0.7
    9 Housing Material Black PBT

    Dimensions and Material (unit: mm)

    695c7cb50fa0321774.png
    Tolerance: ±0.5mm Except Specified

    Notice (Handling)

    • 1 The component may be damaged if mechanical stress exceeding specifications is applied.
    • 2 Take care to protect the operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change.
    • 3 Avoid excessive pulling of the lead wire because the wire may break or the soldering point come off.

    Notice (Storage and Operating Condition)

    1. Product Storage Condition

    Please store the products in a room where the temperature/humidity is stable and avoid places where there are large temperature changes.

    Please store the products under the following conditions:

    🌡 Temperature: -10 to +40°C 💧 Humidity: 15 to 85% R.H.
    2. Expiration Date on Storage

    Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery.

    If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions.

    Please confirm solderability and characteristics for the products regularly.

    3. Notice on Product Storage

    Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, may be degraded in solderability due to storage in a chemical atmosphere.

    Frequently Asked Questions

    QWhat is the resonance frequency of the HYR-1404L buzzer?
    The HYR-1404L operates at a resonance frequency of 4.0 KHz using a square wave signal.
    QWhat is the maximum input voltage for the HYR-1404L?
    The maximum input voltage is 30 Vp-p. Exceeding this value may damage the component.
    QWhat is the operating temperature range of the HYR-1404L?
    The HYR-1404L can operate within a temperature range of -20°C to +70°C, making it suitable for a wide range of environments.
    QHow should the HYR-1404L be stored to maintain its quality?
    Store the product in a stable environment with a temperature between -10°C and +40°C and humidity between 15% and 85% R.H. Avoid chemical atmospheres including acids, alkalis, organic gases, and sulfides.
    QWhat is the shelf life of the HYR-1404L?
    The shelf life is six months from the delivery date under sealed and unopened packaging conditions. Products stored longer than six months should be checked for solderability before use.
    QWhat precautions should be taken when handling the HYR-1404L?
    Avoid applying mechanical stress beyond specifications, protect the circuit from surge voltages caused by shock or temperature changes, and do not excessively pull the lead wire to prevent breakage or detachment of the soldering point.