0102030405
Hydz D12H7 Piezoelectric Sounder - Low Power, High Reliability | China Suppliers & Factory
Part No: HYR-1240A-05
Electrical Characteristics
| No. | Parameter | Specification |
|---|---|---|
| 1 | Resonance Frequency (KHz) | 4.0 |
| 2 | Max Input Voltage (Vp-p) | 30 |
| 3 | Capacitance at 120Hz (nF) | 10±30% |
| 4 | Sound Output at 10cm (dB) | ≥80 at 4.0KHz Square Wave 5Vp-p |
| 5 | Current Consumption (mA) | ≤3 at 4.0KHz Square Wave 5Vp-p |
| 6 | Operating Temperature (℃) | -20~+70 |
| 7 | Storage Temperature (℃) | -30~+80 |
| 8 | Weight (g) | 0.7 |
| 9 | Housing Material | Black PPO |
Dimensions and Material (unit: mm)
Tolerance: ±0.5mm Except Specified
Notice (Handling)
- Do not apply DC bias to the piezoelectric buzzer; otherwise insulation resistance may become low and affect the performance.
- Do not supply any voltage higher than applicable to the piezoelectric buzzer.
- Do not use the piezoelectric buzzer outdoors. It is designed for indoor use. If the piezoelectric buzzer has to be used outdoors, provide it with waterproofing measures; it will not operate normally if subjected to moisture.
- Do not wash the piezoelectric buzzer with solvent or allow gas to enter it while washing; any solvent that enters it may stay inside a long time and damage it.
- A piezoelectric ceramic material of approximately 100µm thick is used in the sound generator of the buzzer. Do not press the sound generator through the sound release hole otherwise the ceramic material may break. Do not stack the piezoelectric buzzers without packing.
- Do not apply any mechanical force to the piezoelectric buzzer; otherwise the case may deform and result in improper operation.
- Do not place any shielding material or the like just in front of the sound release hole of the buzzer; otherwise the sound pressure may vary and result in unstable buzzer operation. Make sure that the buzzer is not affected by a standing wave or the like.
- Be sure to solder the buzzer terminal at 350°C max. (80W max.) (soldering iron tip) within 5 seconds using a solder containing silver.
- Avoid using the piezoelectric buzzer for a long time where any corrosive gas (H2S, etc.) exists; otherwise the parts or sound generator may corrode and result in improper operation.
- Be careful not to drop the piezoelectric buzzer.
Frequently Asked Questions (FAQ)
What is the standard resonant frequency and sound output for HYR-1240A-05?
The buzzer has a resonant frequency of 4.0 KHz and generates a sound pressure output of ≥80 dB at 10cm using a 4.0KHz square wave at 5Vp-p.
What are the recommended soldering conditions for the terminals?
Soldering should be performed at a maximum temperature of 350°C (80W maximum iron tip rating) within 5 seconds using silver-containing solder.
Can this piezoelectric buzzer be utilized in outdoor applications?
The device is primarily designed for indoor use. If deployed outdoors, adequate waterproofing measures must be provided to prevent moisture ingress, which causes operational failure.
Why must DC bias voltage be avoided?
Applying DC bias to the piezoelectric buzzer can significantly reduce the insulation resistance, thereby compromising overall acoustic performance and stability.
What are the operational temperature limits and enclosure specifications?
HYR-1240A-05 operates reliably between -20℃ and +70℃ (storage range: -30℃ to +80℃), features a durable Black PPO housing, and weighs approximately 0.7g.
What precautions should be taken regarding the sound emission hole?
Never insert objects or press against the sound hole as the internal ceramic element is delicate (approx. 100µm thick). Additionally, keep the front area free of shielding material to avoid unstable sound pressure and standing wave interference.



