Leave Your Message

China D17H7 Piezoelectric Sounder - Reliable, Low Power, Cost-Efficient Suppliers & Factory Solutions

Features:

Microcomputers are essential components in various applications, including microwave ovens, air conditioners, automobiles, toys, timers, and alarm systems. These devices utilize externally driven piezoelectric sounders, which are commonly found in digital watches, electronic calculators, telephones, and more.

Our sounders are activated by a precise signal, such as 2048Hz or 4096Hz, generated by LSI technology, delivering melodious audio output.

1. Energy-efficient with low power consumption

2. Silent operation with high reliability

3. Fully automated production process for enhanced cost-efficiency

As a leading supplier from China, we pride ourselves on delivering high-quality products manufactured in our state-of-the-art factory. Trust us for all your microcomputer and sounder needs.

    Electrical Characteristics

    Part No: HYR-1740A
    1 Resonance Frequency (KHz) 4.0
    2 Max Input Voltage (Vp-p) 30
    3 Capacitance at 120Hz (nF) 15,000±30% at 100Hz
    4 Sound Output at 10cm (dB) ≥85 at 4.0KHz Square Wave 12Vp-p
    5 Current Consumption (mA) ≤8 at 4.0KHz Square Wave 12Vp-p
    6 Operating Temperature (℃) -20~+70
    7 Storage Temperature (℃) -30~+80
    8 Weight (g) 0.7
    9 Housing Material Black PBT

    Dimensions and Material (unit: mm)

    Tolerance: ±0.5mm Except Specified

    Notice (Handling)

    • Do not apply DC bias to the piezoelectric buzzer; otherwise insulation resistance may become low and affect the performance.
    • Do not supply any voltage higher than applicable to the piezoelectric buzzer.
    • Do not use the piezoelectric buzzer outdoors. It is designed for indoor use. If the piezoelectric buzzer has to be used outdoors, provide it with waterproofing measures; it will not operate normally if subjected to moisture.
    • Do not wash the piezoelectric buzzer with solvent or allow gas to enter it while washing; any solvent that enters it may stay inside a long time and damage it.
    • A piezoelectric ceramic material of approximately 100µm thick is used in the sound generator of the buzzer. Do not press the sound generator through the sound release hole otherwise the ceramic material may break. Do not stack the piezoelectric buzzers without packing.
    • Do not apply any mechanical force to the piezoelectric buzzer; otherwise the case may deform and result in improper operation.
    • Do not place any shielding material or the like just in front of the sound release hole of the buzzer; otherwise the sound pressure may vary and result in unstable buzzer operation. Make sure that the buzzer is not affected by a standing wave or the like.
    • Be sure to solder the buzzer terminal at 350°C max.(80W max.)(soldering iron trip) within 5 seconds using a solder containing silver.
    • Avoid using the piezoelectric buzzer for a long time where any corrosive gas (H2S, etc.) exists; otherwise the parts or sound generator may corroded and result in improper operation.
    • Be careful not to drop the piezoelectric buzzer.

    Frequently Asked Questions (FAQ)

    What is the sound output level and resonant frequency of HYR-1740A?
    The buzzer has a resonant frequency of 4.0 KHz and provides a minimum sound output of 85 dB at 10cm under a 4.0KHz square wave 12Vp-p signal.
    What is the maximum allowed input voltage for this buzzer?
    The maximum input voltage specified for the HYR-1740A is 30 Vp-p. Applying higher voltage can cause damage to the internal piezoelectric element.
    Can the HYR-1740A buzzer be used outdoors?
    It is engineered primarily for indoor environments. If outdoor usage is necessary, proper waterproofing precautions must be applied as moisture prevents normal operation.
    What are the soldering specifications for terminal attachment?
    Terminals should be soldered at a maximum iron tip temperature of 350°C (up to 80W max) within 5 seconds using silver-bearing solder.
    Why should direct current (DC) bias be avoided?
    Applying a DC bias across the piezoelectric buzzer can significantly decrease insulation resistance and degrade operational performance over time.
    What housing material and temperature limits apply to HYR-1740A?
    The buzzer features a Black PBT housing. It operates reliably between -20°C and +70°C and can be safely stored between -30°C and +80°C.